Tuesday, April 16, 2024

2023-2024 Is Finished

 Empty tent, time to make needed changes:


Last two of 2023-2024 grow hanging to dry:


These last two plants may save this years crop. Up till now every plant has been underwhelming I think mostly because I didn't understand where the problems with DWC would bite you on the butt. The two biggest problems are root rot (water too hot) and EC build up. With RDWC a water chiller will fix the water temp problem.  The EC problem may not be so easy. Our house water has a basic EC of 1.0. Starting EC should be <0.35 EC and for mature Cannabis plants EC should be under 2.2 max. The two easy answers are bottled water or a reverse osmosis system. Right now I'm not sure which way to go.

I expect the next few days will involve cleaning and making planned changes to the tent. Unless something changes the next grow will start mid October once we are back from Oregon.

Sunday, April 14, 2024

One To Go

 The 2023-2024 grow is truly in the short rows with just one GG4 Auto left in the tent.


Most of the stigmas are still white with maybe 5% brown. Some believe a 60% white 40% brown ratio indicates a mature ready to harvest plant. I like a little more brown and at least a small percentage of dark trichomes. This plant is getting there, maybe a couple more days to a week to go. Whatever this sucker is going to be a massive producer for a meter tall indoor grown plant.

Its buddy, the next to last plant harvested from the 2023-2024 grow is drying as I type. Between the two of 'em the 2023-2024 grow may turn out to be OK, I expect close to a couple of pounds of flower the only question is THC content. I'm not sure if it is this cultivar or other grow factors but up till now this crop's THC production has disappointed. I've grown GG4 Auto before and THC tested in the low to mid 20% so far no plant this grow has produced more than 18% THC, most were much lower not even making it into the teens. It is not a total deal breaker, truth is 11% THC flower gives a pleasant "high", it's just not as good for making FECO or other products. 

When this plant is hung up to dry the tent will get a good cleaning, changes to the inside support systems will be made, and the new RDWC system with a water chiller will be set up in prep for the 2024-2025 grow season starting mid October. The 2024-2025 grow is planned to have two parts an inside the tent grow of four Dutch Passion "Power Plant Auto" and a later grow starting mid February outdoors with six plants of Barney's Farm "Sour Diesel Auto". That's the plan, now let us see if the Cannabis gods allow it to happen.

See you on down the road, next up is a month in UK with MsBubba and the kids then two months Camp Hosting at Harris Beach State Park outside Brookings, OR and I expect a proving run with the motorhome sometime before heading to Oregon. 

Tuesday, April 2, 2024

More Short Rows

 To make the mods and ready the tent for next season's grow I need to harvest the last two plants from the current grow. For reasons only the Cannabis gods know these two ain't going there.  Two weeks ago I figured from the grow history and the plants appearance they had at most a couple weeks to finish. Two weeks later they are still at least two weeks out, maybe more:


 Two weeks ago the Stigmas were white with a few (very few) amber ones, today the white/amber ratio is unchanged.  The Trichrome story is the same, most are cloudy but amber ones are rare.

One difference of concern, both plants have started "foxtailing", the one on the right more than the other.  


The classic reason for foxtailing is the tent is too damn hot. Temp control has been a battle. The tent has two exhaust ports with fans and two air inlets also with fans. One of the inlets was the AC unit and one of the exhaust ports was used by the AC unit. The problem with that setup was the heat from the exhaust duct work negated the cool air from the AC unit. The easy answer is; move the AC unit and duct work outside the tent.

To do that was the cause of major butt scratching, some orders shipped from Home Depot, building a frame to hold the duct work to the AC unit, and a lucky glance at the shop's 8" Jointer. The jointer's dust collection plenum looked to be perfect for the AC unit.

It was, and now works a treat with the AC unit and duct work outside the tent. A few minutes online and a new jointer plenum is on the way. Joy to the world.


It ain't pretty but it works. About the only downside I know of is the built in thermostat doesn't work.

Did I ever tell you about the time I used duct (100mph) tape to fix the horizontal stabilizer on the plane so I could fly it to the repair shop?

Once the last two go the pan will come out and cleaned, the tent will be "bombed", and a couple of small changes to the aux equipment in the tent. The last big change will be setting up the RDWC four grow bucket system.

Long post, maybe because I made gummies today from FECO. The FECO was planned to have around 2500mg of THC giving about 50mg/gummy. From the effect of the "test" gummy I tried I believe we hit the mark.  
    

Wednesday, March 27, 2024

In the Short Rows

 Only two GG4 Auto plants left in the tent. These two illustrate this grow, all the plants were from the same cultivar from same seed bank, started at the same time, and have had the same light and feed schedule but two different plants from fan leaves to flowers.

I'm looking forward to harvesting these last two so I can get on to prepping for next Fall/Winter grow. Most of the gear is in the shop still in boxes but once the last two plants are hung to dry it will come out to play. 

The big changes will be: The eight bucket DWC system will be replaced with a four bucket RDWC system. The AC unit will be moved to outside the tent.  A water chiller and a reserve H2O tank will also be added outside the tent. Smaller changes will be moving the AC power center from the back of the tent to the right side and routing the wires so there is little interference with the plants.

Maybe you noticed the change from an eight bucket system to a four bucket one. I've had a wrestling match with myself over number of plants for a couple of grow seasons. Bottom line while a heavy user, I do not use very much. While this is slowly changing, my go to method has been a bong and with a bong you use very little good weed. There's still a ½ kilo of weed left from the first grow after retiring and I waste a lot playing with making tinctures, infusions, and carts. BTW, the cart play is starting to work and as hinted above carts may become my goto method.

Anyway a long way around to I do not need the PITA more plants can be, four good producers should be enough for a year's supply plus some and if not retail Cannabis is pretty cheap.

One other appliance I expect to add is a small freezer, one that will go to -40C to use for a better quick wash extraction. As I noted above I'm moving away from smoking weed, whether bong or joints. Carts, gummies, and infusions are becoming prime so extraction tech is also gaining importance.   

Monday, March 18, 2024

Thoughts As I Near the End Of First DWC Grow

 First Hydroponics works to make big plants. But there are a few "Buts". Biggest is Root Rot if you are doing DWC. With DWC the plant's roots are always in water which works great unless they develop root rot. There are ways to prevent root rot such as using hydrogen peroxide or bleach to sterilize the water or adding "good" bugs like HydroGuard to fight the bad ones but I expect the only real way is with a water chiller or go to a system that is hydroponic but allows the roots to dry like a "Flood and Drain" system.  

One question not answered with this first venture into hydroponics is even though the plants grow bigger and faster than in soil or Coco Coir are they as, less, or more potent. In other words will a hydroponic plant make as much or more THC as a soil grown plant. I have grown GG4 Auto in soil and it tested on average low to mid 20's percent THC. This grow, even in Coco Coir, the GG4 Auto so far has not tested above the high teens for THC. The THC question is still a question. Is it the cultivar, this set of seeds, or is the low THC content because of hydroponics and the hydroponic feed (Ventana Plant Science) and schedule. The one thing I know is most of the low THC from some of the plants is because of root rot in the latter stages of growth and stunted finishing.

The answer for the next grow is still hydroponics but I will go to a RDWC v. DWC and adding a water chiller to the system. Because a RDWC system uses a central feed a water chiller should keep the roots cool enough to prevent root rot. If a cooler doesn't help with root rot and THC levels I might go to a flood and drain system and if that doesn't work then back to soil.

BTW, this grow started out as a test of hydroponics. The original plan was to grow four plants in a DWC system and four in Coco Coir and after harvest compare product. That got thrown out the window when the seeds didn't "pop" on schedule or make it past the seedling stage, in fact I needed 20 seeds to get 8 plants and ended up with only one of those in Coco Coir. 

Saturday, March 16, 2024

Processing The Crop

 My Harvest SOPs are changing. Always before I'd hand trim the plant after a week or more of hanging whole, upside down, in a corner of the shop. It would be a loose trim with buds and sugar leaves going into bags or jars to cure and the trim going to a neighbor along with a few buds.

Additional processing equipment has changed almost everything. The plants are still cut down whole (for now) and hung to dry for a week or more but six or seven days into the drying cycle I trim off some of the lower buds and run 'em thru the Rosin Press. The GG4 Auto in Coco Coir just harvested produced 1g of Rosin from 9g of lower buds. A few days after trimming some of the lower buds I will run the rest of the plant thru the bowl trimmer recovering the top shelf bud and good amount of potent trim. The sticks go in the trash.

The current GG4 Auto grown in Coco Coir produced 80g of top shelf bud with 45g of good trim (I'll let the bud dry a little more before testing for THC content). From previous history the trim should give ~3000mg THC, good for 60 mg gummies or even loading a 510 cart. The bud is jared and curing.

I'l need to pick up my game if I plan on a kilo of bud out of this years crop. The first crop was a total bust so no help from it, the winter crop is OK but I expect no more than 150g/plant from the rest of the crop which would work out to ~750g or ¾ of a kilo.

Processing the trim will make up for the bud shortfall, with plenty of FECO to make gummies, 510 carts, and concentrate for vaping.  I think the new SOPs will work a treat.

Saturday, March 9, 2024

Harvested The Coco Coir Plant

 All that is left to harvest of the 2023-2024 grow are five DWC plants. The Coco Coir grown plant has been "cut" and is hanging. In three or four days I will trim some of the lower buds to press into rosin. The rest of the plant will have a pass thru the bowl trimmer once it is "dry" with the buds saved for smoking and trim going to make FECO.

The last bach of gummies from FECO kick ass. They were made a couple of weeks ago stuck in the fridge and kinda forgotten about. Night before last I ate a whole one and ended up going to bed stoned out of my gourd because I wasn't functional. This morning tried half of one and it was a perfect day time stone, the world was a half bubble off plumb but I still functioned very well. I may try to find new gummy molds, the two I have are either too big or too small.

As this years grow finishes I'm planning changes for next. Once the tent is empty I will add the Solar System 550 to the Solar System 1100 with both as high in the tent as possible. The current DWC system will be replaced with an Artisun four bucket RDWC system. That system and the tent should work for either Photoperiod or Auto plants. Artisun also has a six bucket "ebb and flow" system that looks interesting. I can see where it would have some advantage over a RDWC system in Root Rot is less of a problem. It also has an out of the tent water reservoir to keep the "system" topped off. It would be nice if you could walk away for four or five days at a time, it would make my "Marijuana Widow" a much happier camper.  

I will try to avoid having "side" plants next year, any "extra" plants will be grown in Coco Coir and fitted around the RDWC system inside the tent. In addition to the tent I'm going to try an outdoor Auto grow timed to start Veg period the first of March. BTW, I still have two very small plants almost ready to harvest from this years outdoor attempt that started much too early. Those two plants prove just how hardy and weed like "weed" is they just would not die no matter how hard I tried to kill 'em. 

Back to this years crop and maybe counting the chickens too early but from the looks of the plants left to harvest I may get a kilo or more of top shelf smoking bud along with enough trim for a year or two of FECO. Not too bad for a totally legal crop, in fact from a few plants short of the max.

Setup Is Complete

 This years Winter grow didn't have a great start.  First problem the RDWC system had bad leaks and I couldn't find replacement seal...